flag_of_ecuador.png
1200px-flag_of_the_united_states.svg.png
fas fa-life-ring

.    LIFE-SAVING

fas fa-fire-extinguisher

FIRE FIGHTING

fas fa-rss

. GMDSS

fas fa-ship

.          LOAD TESTING

LIFERAFTS SERVICING

The inspection and maintenance service for liferafts installed on recreational craft, merchant vessels and submarines is carried out at our service stations in compliance with the requirements of the National Maritime Authority and IMO Resolution A.761(18), ensuring their operational readiness in any emergency situation.

LIFEBOATS SERVICING

Through annual and five-yearly inspections and tests, we ensure the proper functioning of the equipment. This includes overload testing, maintenance of the Lifeboat Recovery and Rescuer System (LRRS) and its launching appliances, in compliance with SOLAS Regulations III/20.3.2 and III/20.11, and MSC.1/Circ.402(96).

SELF-CONTAINED 
BREATHING APPARATUS

The servicing of these types of equipment is carried out using specialized tools and calibrated testing equipment, in compliance with CGA Grade D breathing air quality standards.

INFLATABLE AND 
FOAM LIFEJACKETS 

Every lifejacket received for servicing undergoes a thorough inspection to ensure its full operational readiness and optimal performance in an emergency situation.

MEDICAL OXYGEN EQUIPMENT 

All vessels carrying cargo classified under the IMDG Code are required to carry a minimum amount of emergency medical oxygen equipment on board. We provide inspection, maintenance, and refilling services for all types of medical oxygen equipment.

IMMERSION SUITS

Hypothermia is one of the main risks faced by anyone working in cold waters. Wearing an immersion suit under these conditions significantly increases the chances of survival. Our immersion suit servicing is carried out in compliance with MSC/Circ.1114.

AIR COMPRESSOR MAINTENANCE 
AND QUALITY TESTING

In accordance with MSC.1/Circ.1432, BA recharging systems must undergo annual air quality checks to ensure compliance with applicable breathing air quality standards, such as EN 12021 and CGA Grade D or E. These tests verify the levels of moisture (H₂O), carbon monoxide (CO), carbon dioxide (CO₂) and oil contamination.

HYDROSTATIC TESTINGS 
OF HIGH AND LOW-PRESSURE CYLINDERS

We operate our own hydrostatic testing facility for high and low-pressure cylinders, allowing us to monitor and verify every stage of the testing process. All equipment used is calibrated and certified to ensure safe and reliable operations.

FIRE EXTINGUISHERS SERVICING

We provide inspection, hydrostatic testing, recharging, repair, maintenance, and certification services for all types of fire extinguishers, regardless of capacity, using high-quality materials and components.

FIXED CO₂ FIRE SUPPRESSION SYSTEMS

The inspection of onboard fixed CO₂ systems using ultrasonic technology (ULLI) enables faster, safer, and more efficient verification of CO₂ cylinder levels.

WATER MIST

Inspección integral de sistema water mist, que permite la reducción del tamaño de las llamas como agente extintor a bordo.

SISTEMAS DE DETECCIÓN DE HUMO,
DETECCIÓN DE GASES Y 
ALARMAS CONTRA INCENDIO

La completa operatividad de este tipo de sistemas resulta de importancia crítica para la protección del barco y de su tripulación, posibilitando una rápida reacción en un momento de emergencia.

RECARGA DE CO2

Nuestro tanque criogénico nos permite contar con disponibilidad de recarga inmediata 24/7 para un servicio mucho más ágil y seguro, permitiendo reducción de costos y de tiempos de servicio.

EPIRBS Y SARTS

Somos estación autorizada y representantes en Ecuador de ACR-ARTEX, fabricante líder de equipos electrónicos de localización de emergencia. Nuestro software y equipos de prueba de última generación nos permiten llevar a cabo la programación, test y remplazo de batería de diversos modelos y marcas de radiobalizas y respondedores de radar.

PRUEBA DE GRÚAS Y EQUIPOS DE CARGA

Mediante el uso de bolsas de lastre especialmente diseñadas con capacidad de prueba de hasta 50 T, en conjunto con nuestro dinamómetro de 100 T de capacidad, nos es posible identificar cualquier problema antes de que la carga máxima sea aplicada.

PRUEBAS BOLLARD PULL

La tracción a punto fijo o bollard pull es la cantidad de fuerza que un remolcador es capaz de aplicar en un trabajo de remolque en determinadas condiciones. Estas pruebas son realizadas mediante el uso de un dinamómetro wireless de alta precisión para una maniobra más rápida y segura.

Guayaquil

Los Vergeles Mz. 222 solar 7 Av. Francisco de Orellana Tel: (04) 2028158

PRIVACY POLICY

Manta

Km 4 1/2 vía Manta - Montecristi located behind "Moderna de Alimentos" Miller ventas@setmabas.com

Customer service administracion@setmabas.com

Technical support
technical@setmabas.com

Accounting and finance accounting@setmabas.com

Image

Customer service administracion@setmabas.com

Technical support

technical@setmabas.com

Accounting and finance accounting@setmabas.com